Town Seal
Final Plat
The Town of Holderness, New Hampshire
        The final plat submitted for approval and subsequent recording shall be submitted in quadruplicate.  The material, size of sheet, margins and scales shall be as required in Section VIII, Preliminary Layout.  Adequate space shall be available on the map for the necessary endorsement of the Board, which wording shall read:

“Approved by the Holderness Planning Board on _____________________(date) Certified by Chairman________________________________________________(name) and Secretary________________________________________(name).”

        Two copies of the Approve and Endorsed Final Plat shall be retained by the Board and two copies approved and endorsed shall be given to the subdivider.  The subdivider shall be responsible for the payment of the recording fee.  The final plat shall show:

Proposed subdivision name or identifying title, the name and address of the owner of record and subdivider, the name, license number and seal of the engineer and/or surveyor, date, scale, tax map number and north point.

Monuments, driveways, street and other right-of-way lines, pedestrian ways, building setback lines, lot lines, lot sizes in square feet, reservation lines, easement lines and areas to be dedicated to public use, areas for community use, and the areas which are reserved by the subdivider.

Typical design and location of any proposed on-lot sewage and water systems and location and size of any proposed storm pipes and catch basins.

9.4     Sufficient data to determine readily the location, bearing, length of every street or right-of-way line, lot line, boundary line, easement lines and reservations and to produce such line upon the ground.  Designation and area of each lot.

Typical street cross sections and approximate grades, profiles and locations and sizes of any bridges and culverts.

All dimensions shall be shown to the nearest 1/100 of a foot and bearings to the nearest minute.

Location and description of each permanent monument.

Other Data.  The subdivider shall submit in quadruplicate all drawings and specifications required for the construction of all required improvements, and such assurances and bonds as the Board may require (Section 5.11).

Whole Site
This Folder
 
Advanced Search